WORKSHOP EQUIP

LT065P
PARTS WASHER.
Capacity: 76 litres.
Dimensions: 880mm x 760mm x 530mm.
Pump: 240 volt, 10 litres per minute.
Washer has a fusible hinged lid which collapses in the event of a fire, a flexible metal spout and a parts storage tray. Use only recommended liquids such as diesel, kerosene or detergent based cleaning agents. DO NOT use highly flammable liquids or solvents.
BAR CODE: 9314458084590.

LT066C
PANEL BEATING KIT.
7 piece kit with pick and finish hammer, standard bumping hammer, reverse curve hammer. Utility, double end hand, shrinking and curved dollies.
BAR CODE: 9314458085108.

WORKSHOP
EQUIPMENT

LT066D
DENT PULLER KIT.
5 piece kit with adaptors and 3 lb slide hammer, great for pulling out dents, as a bearing puller or to pull object in tight places.
BAR CODE: 9314458085153.

LT067A
TROLLEY JACK.
Capacity: 1500 KG.
This jack has been tested and approved to Australian Standards AS/NZS 2615- 1995.
Lift range: 135mm to 350mm.
Overall length: 490mm.
Comes with carry handle.
BAR CODE: 9314458085252.

LT067CH
CAR CHOCKS.
2 piece. Fold up for storage.
Chocks must be used to chock the unlifted wheels of your car when lifting with a jack.
BAR CODE: 9314458085368.

LT067E1
GARAGE JACK.
Capacity: 1800 KG.
This jack has been tested and approved to Australian Standards AS/NZS 2615- 1995.
Lift range: 130mm to 490mm.
Overall length: 660mm.
Weight: 40 kg.
BAR CODE: 9314458085412.

LT068A
BOTTLE JACK.
Capacity: 1850 kg
Lift range: 181mm to 345mm.
Tested & approved to Australian Standard: AS/NZS 2693-1993.
BAR CODE: 9314458085504.

LT068BA
BOTTLE JACK.
Capacity: 4000 kg
Lift range: 194mm to 372mm.
Tested & approved to Australian Standard: AS/NZS 2693-1993.
BAR CODE: 9314458085559.

LT068CA
BOTTLE JACK.
Capacity: 6000 kg
Lift range: 216mm to 413mm.
Tested & approved to Australian Standard: AS/NZS 2693-1993.
BAR CODE: 9314458085603.

LT068DA
BOTTLE JACK.
Capacity: 8000 kg
Lift range: 205mm to 400mm.
Tested & approved to Australian Standard: AS/NZS 2693-1993.
BAR CODE: 9314458085658.

LT068FA
BOTTLE JACK.
Capacity: 12000 kg
Lift range: 219mm to 414mm.
Tested & approved to Australian Standard: AS/NZS 2693-1993.
BAR CODE: 9314458085696.

LT068GA
BOTTLE JACK.
Capacity: 20000 kg
Lift range: 250mm to 465mm.
Tested & approved to Australian Standard: AS/NZS 2693-1993.
BAR CODE: 9314458085795.

CLICK FOR FULL SIZE IMAGE CLOSE WINDOW BEFORE OPENING ANOTHER

LT068J
SCISSOR JACK.
Capacity: 750 kg
Lift range: 100mm to 400mm.
Tested & approved to Australian Standard.
BAR CODE: 9314458085702.

LT068N2
CHAIN BLOCK & TACKLE.
Capacity: 1,000 kg.
Tested and approved to Australian Standard AS/NZS 1418.2-1990.
Chain drop: 2.5 metres.
BAR CODE: 9314458085726.

LT068P1
ENGINE STAND.
Capacity: 1,000 lb.
4 wheel pattern construction.
Makes working on and moving engines around workshop easier.
BAR CODE: 9314458085771.

LT068R
CAR RAMPS.
1 pair.
Australian made to Australian Standards AS/NZS 2640-1994.
Heavy duty checker plate design.
Load rating: 750 kg per ramp.
BAR CODE: 9314458085788.

LT068SA
AXLE STAND.
2 piece.
Capacity: 2,000 kg per stand.
Lift range: 290mm to 420mm.
Tested and approved to Australian Standard AS/NZS 2538-1995.
Ratchet type operation. Extra wide platform and stabilised feet give added stability under load.
BAR CODE: 9314458085801.

LT068SB
AXLE STAND.
2 piece.
Capacity: 4,000 kg per stand.
Lift range: 395mm to 596mm.
Tested and approved to Australian Standard AS/NZS 2538-1995.
Ratchet type operation. Extra wide platform and stabilised feet give added stability under load.
BAR CODE: 9314458085818.

LT069A
MECHANICS CREEPER.
Metal frame. Fully paddes board and pillow. 6 nylon castors. Makes working in tight places easy and comfortable.
BAR CODE: 9314458086129.

LT069CFB-4
SWIVEL BASE VICE.
Size: 100mm.
LT069CFB-6
SWIVEL BASE VICE.
Size: 150mm.
Cast iron vice with hardened jaws.
BAR CODE: 9314458086754.

LT069U
UTILITY SEAT.
Nylon swivel castor wheels and storage shelf under seat. Light weight. Assembly required. Great for workshop, home office, car, garden and factory. Eliminates continual bending of back.
BAR CODE: 9314458086969.

LT069V
UTILITY SEAT.
Fully padded seat. Nylon swivel castors. Storage tray under seat.
Great for workshop, home office, car, garden and factory. Eliminates continual bending of back.
BAR CODE: 9314458086976.

LT070
HAND TRUCK AND DOLLY.
Is a hand truck in upright position and a dolly in down position. Comes with bag holder for collecting garden clippings and recyclables.
Capacity: 80 kg.
Height: 1125mm.
BAR CODE: 9314458087508.

LT070H
HAND TRUCK.
P handle truck with pneumatic tyres. Has a 350mm x 220mm pick up plate.
Capacity: 280 kg.
Overall height: 1320mm.
BAR CODE: 9314458087539.

LT070HS
SMALL HAND TRUCK.
With solid rubber tyres.
Has a 350mm x 180mm pick up plate.
Capacity: 120 kg.
Overall height: 980mm.
BAR CODE: 9314458087546.

LT072J
PNEUMATIC TYRE.
Offset.
Size: 265 x 85mm.
Suit axle: 16mm.
Replacement tyre for LT070H
BAR CODE: 9314458087133.